Cray

From Tau Wiki
Jump to: navigation, search

Cray XK6/XK7

GPU performance tracking

1. Configuring TAU:

module load cudatoolkit
./configure -arch=craycnl -cuda="$CRAY_CUDATOOLKIT_DIR" -cudalibrary="$CRAY_CUDATOOLKIT_POST_LINK_OPTS" -bfd=download

Setup your environment:

export PATH=<path to tau2>/craycnl/bin:$PATH
export LD_LIBRARY_PATH=<path to tau2>/craycnl/lib:$LD_LIBRARY_PATH

2. CUDA

Build as normally would, and modify your run command to be:

aprun -N 1 tau_exec -T serial,cupti -cupti ./matmult

3. OpenACC

Remember to load the cray acc module:

module load  craype-accel-nvidia20

Both PGI and Cray compilers uses the CUDA driver API to interact with the GPU, so to setup TAU to collect those calls:

export TAU_CUPTI_API=driver

Compile as normally would and run with tau_exec:

aprun -N 1 tau_exec -T serial,cupti -cupti ./matmult

4. Viewing profiles

TAU profile are written to disk as profile.* (you may have several files.) You can view TAU profiles either through pprof (text-basied) or paraprof (GUI).

5. Tracing

Traces can be capture by setting:

export TAU_TRACE=1 

before running your application. The traces need to be post-processed as well, issue these commands:

aprun -N 1 tau_exec -T serial,cupti -cupti ./matmult
tau_multimerge
tau2slog2 tau.trc tau.edf -o matmult.slog2
jumpshot matmult.slog2

Jumpshot is a common Trace visualizer bundled with TAU.