#       Makefile.h file for scooter.asci.uchicago.edu
#
#	FLASH makefile definitions for Linux (Intel compiler)


#----------------------------------------------------------------------------
# Set the HDF/HDF5 library paths -- these need to be updated for your system
#----------------------------------------------------------------------------


HDF5_PATH   = $(HOME)/apps/regression/flash/hdf5-1.6.5
MPI_PATH    = /usr/local/packages/mpich2-1.0.4p1/intel-9.1/

#PAPI_PATH  = /usr/local/packages/papi-3.2.1
#PAPI_FLAGS = -c -I$(PAPI_PATH)/include

ZLIB_PATH  =

#NCMPI_PATH = /usr/local/pnetcdf-1.0.0-icc
#SAMRAI_PATH = /usr/local/SAMRAI-v2.0.0
MPE_PATH   =

#----------------------------------------------------------------------------
# Compiler and linker commands
#
#  We use the f90 compiler as the linker, so some C libraries may explicitly
#  need to be added into the link line.
#----------------------------------------------------------------------------

FCOMP      = ifort
CCOMP      = icc
CPPCOMP    = icpc
LINK       = ifort 

# pre-processor flag

PP         = -D

#-----------------------------------------------------------------------------
# Compilation flags
#
#  Three sets of compilation/linking flags are defined: one for optimized code
#  code ("-opt"), one for debugging ("-debug"), and one for testing ("-test").
#  Passing these flags to the setup script will cause the value associated with
#  the corresponding keys (i.e. those ending in "_OPT", "_DEBUG", or "_TEST") to
#  be incorporated into the final Makefile. For example, passing "-opt" to the
#  setup script will cause the flags following "FFLAGS_OPT" to be assigned to
#  "FFLAGS" in the final Makefile. If none of these flags are passed, the default
#  behavior will match that of the "-opt" flag.
#  In general, "-opt" is meant to optimize compilation and linking. "-debug"
#  should enable runtime bounds checking, debugger symbols, and other compiler-
#  specific debugging options. "-test" is useful for testing different
#  combinations of compiler flags particular to your individual system.
#----------------------------------------------------------------------------

FFLAGS_OPT   =  -c -r8 -i4 -O3 -real_size 64  
FFLAGS_DEBUG =  -c -g -r8 -i4 -O0 -real_size 64 -check bounds -check format -check output_conversion -warn all -assume none
FFLAGS_TEST  =  -c -r8 -i4 -real_size 64 

FFLAGS_PAPI  = -I$(PAPI_PATH)/include
FFLAGS_MPI   = -I$(MPI_PATH)/include

F90FLAGS     = -real_size 64

CFLAGS_OPT       = -c -O3 -D_LARGEFILE64_SOURCE 
CFLAGS_DEBUG       = -c -g -D_LARGEFILE64_SOURCE 
CFLAGS_TEST       = -c -O0 -D_LARGEFILE64_SOURCE 

CFLAGS_HDF5   = -I$(HDF5_PATH)/include
CFLAGS_NCMPI  = -I$(NCMPI_PATH)/include
CFLAGS_SAMRAI = -I$(SAMRAI_PATH)/include
CFLAGS_MPI    = -I$(MPI_PATH)/include


#----------------------------------------------------------------------------
# Linker flags
#
#  There is a seperate version of the linker flags for each of the _OPT, 
#  _DEBUG, and _TEST cases.
#----------------------------------------------------------------------------

#LFLAGS       = -r8 -i4 -Vaxlib -lsvml -Ur  -o 
LFLAGS       = -r8 -i4 -Vaxlib -Ur  -o 


#----------------------------------------------------------------------------
# Library specific linking
#
#  If a FLASH module has a 'LIBRARY xxx' line in its Config file, we need to
#  create a macro in this Makefile.h for LIB_xxx, which will be added to the
#  link line when FLASH is built.  This allows us to switch between different
#  (incompatible) libraries.  We also create a _OPT, _DEBUG, and _TEST
#  library macro to add any performance-minded libraries (like fast math),
#  depending on how FLASH was setup.
#----------------------------------------------------------------------------

#LIB_HDF4   = -L$(HDF4_PATH) -lmfhdf -ldf -ljpeg -lz
LIB_HDF5    = -L$(HDF5_PATH)/lib -lhdf5 -lz -lpthread
              
#mpi for SGI
#LIB_MPI     = -L$(MPI_PATH)/lib -lmpich -lpmpich
#LIB_MPI     = -L$(MPI_PATH)/lib -lmpi_f90 -lmpi -lorte -lopal -lutil -lnsl -ldl
#LIB_MPI     = -L$(MPI_PATH)/lib -lmpi_f90 -lmpi 
LIB_MPI     = -L$(MPI_PATH)/lib -lmpich -lrt
LIB_PAPI    = $(PAPI_PATH)/lib/libpapi.a $(PAPI_PATH)/lib/_fixunssfdi.o
LIB_PNG     = -lpng -lz

#LIB_OPT     = -L/usr/local/pvfs/pvfs-1.6.3/lib -lpvfs -L/usr/local/gm-2.1.7_Linux/lib -lgm
LIB_OPT     = 
LIB_DEBUG   =
LIB_TEST    =


SAMRAI_LIBLIST = -lSAMRAI1d_algs -lSAMRAI1d_appu -lSAMRAI1d_geom -lSAMRAI1d_hier -lSAMRAI1d_math_special -lSAMRAI1d_math_std -lSAMRAI1d_mblk -lSAMRAI1d_mesh -lSAMRAI1d_pdat_special -lSAMRAI1d_pdat_std -lSAMRAI1d_solv -lSAMRAI1d_xfer -lSAMRAI2d_algs -lSAMRAI2d_appu -lSAMRAI2d_geom -lSAMRAI2d_hier -lSAMRAI2d_math_special -lSAMRAI2d_math_std -lSAMRAI2d_mblk -lSAMRAI2d_mesh -lSAMRAI2d_pdat_special -lSAMRAI2d_pdat_std -lSAMRAI2d_solv -lSAMRAI2d_xfer -lSAMRAI3d_algs -lSAMRAI3d_appu -lSAMRAI3d_geom -lSAMRAI3d_hier -lSAMRAI3d_math_special -lSAMRAI3d_math_std -lSAMRAI3d_mblk -lSAMRAI3d_mesh -lSAMRAI3d_pdat_special -lSAMRAI3d_pdat_std -lSAMRAI3d_solv -lSAMRAI3d_xfer -lSAMRAI

LIB_SAMRAI  = -L$(SAMRAI_PATH)/lib $(SAMRAI_LIBLIST) -L/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/ -lstdc++

LIB_NCMPI   = -L$(NCMPI_PATH)/lib -lpnetcdf 
LIB_MPE     =
#----------------------------------------------------------------------------
# Additional machine-dependent object files
#
#  Add any machine specific files here -- they will be compiled and linked
#  when FLASH is built.
#----------------------------------------------------------------------------

MACHOBJ = 

#----------------------------------------------------------------------------
# Additional commands
#---------------------------------------------------------------------------- 

MV    = mv -f
AR    = ar -r
RM    = rm -f
CD    = cd
RL    = ranlib
ECHO  = echo